EverythingForklifts.com
One stop shopping for everything forklift
Free Price Quotes for New, Used & Rental Forklifts. Start Here.
Free Forklift Price Quotes
Fill out our short form to get free rates for new, used or leased Forklifts.
What are other forklift shoppers looking for?
Our users have described their forklift requirements in detail.
- 4000 pound electric walkie used
- 42" forks with pallet centering device, full function handle, cal osha safety package, safety harness & Chain, 24 volt battery & charger
- 48 or 60 mo. High residual lease preferred on a 6000lb 187" raised mast fork truck.
- 48" forks Timeframe is unknown. We are required to quote multiple vendors and submit our requests for purchase.
- 48" forks, side shift, foam filled tires.
- 50 ton forklift 1991 and up
- Basically, I need a fork truck to unload cargo vans, as well as warehouse work for a small theatrical company.
- Cabin with heater Forks at least 8ft Side shifting Prefer less than 2000 actual hrs Also need quote for 22000-25000lb fork lift. All specs the same except the lift height can be 13-16 feet for this one.
- Compact unit - Good condition for interior use.
- Crown RC stand-up counter balance 240 Quad Mast 42" forks no more then 3000 hrs
- Currently have a Case 586 and would like similar equipment. Could use for trade in.
- High Altitude application 13,000 ft
- It need to meet the standards and codes in the California code of regulations chapter 15, division 3, title 13 for the year 1/1/2010.
- It would be nice to have your correct business number listed. The one that's listed is incorrect.
- Just be aware it is bricks being transported on pallets 21,000 lbs per pallet, 16 pallets total.
- Just getting an idea of how much a used lift would cost to present to corporate.
- Hyster - model H40FT Toyota - model 7FGU20 Yale - model GP050VX
- I Wish to apply for this position as operator because is my profetion,and would like this my humble application would your consideration approval.
- I am a equipment dealer. This would be for resale to my customer. I need you lowest price to another dealer for resale. Thanks, Tim Flagstad
- I am interested in a fork lift with a removable front cage.
- I have a propane forklift and I am researching the cost to replace wirth electric. I use the lift mainly indoors but occasionally have to unload a truck outside my shop
- I have some low ceiling areas at 82 inches.
- I must have side shift.
- I need A rough terrain forklift that will lift 8000 lbs would also need side shift, need to lift 20 ft at least Tractor style with large tires
- I need a 10 ton triple stack capable of 240" height
- I need a 33,000 or 36,000 lb forklift to lift 20' seavan containers in the outdoors/desert.
- I need a lifting pallet jack to lift 2500 pounds, 100 inches high.
- I need a manual for a clark TW30
- I need a price for three to six month rent THANK YOU SIGAL
- I need a telescoping rough terrain forklift to handle 10 to 15 ton. Compare to a reach lift truck
- I need about 4 or 5 hand pallet jack's
- I need an optional Stinger to lift rolls 3500lbs on a 8'' aluminum core.
- Interested only in leasing. Would consider equipment upwards of 6 years old, but in good condition. Need sideshift, 6000# capacity, strobe light (amber, ITA Class 3). Would like to target pricing of no more than $200 per month per unit, by contract.
- It must have horizontal movement in the forks and able to reach a 3 level racking system.
- Just looking at used equipment
- Just looking for a quote on some forklifts
- Just looking for current pricing on 4K 180-185" Electric Forklift (Yale).
- Just need the 5,000 max load, soft tires, shift capabilities
- Just need to make sure it has lights and sound when backing up.
- Just needs to be able to mount on back of flatbed truck and three wheels.
- Lights: Front, both lights below OHG strobe light-amber Attachment: Side shifting fork position Need 2 complete sets of manuals
- Loading and unloading on concrete as well as gravel lot.
- Looking for "green" trucks Lifetime batteries - lithium ion 120 volt plug in anytime chargers Working hours 10 hours per day, 1 hour idle time minimum per day, 14 hours charging time Gearmotor drives no hydraulic fluid Side shifter on fork mounts Need 4000 # capacity lift and tilt
- Looking for 2 all-terrain fork lifts for use in agricultural equipment dealership. Need at least 10,000# lift, side shift, tilt, etc. Cab w/HAC. Looking to trade in at least 1 8000# Daewoo unit.
- Looking for 3000# Cat or Hyster in the 5k range
- Looking for a nice smaller indoor forklift clean.
- Looking for a reach forklift to operate inside (propane or diesel w/a scrubber)
- Looking for a specific pallet truck. Trying to find a BT Prime Mover CMX60 or CMX80, in a 1996 or 1995 vintage.
- Looking for a used Nissan TX30 or similar (Turning radius is important-aisle 96")
- Straight boom 8000# forklift similar to a tcm636n8
- Straight mast, off road, Case/JCB ect 4x4.
- The forklift will be used to move home building materials from the warehouse to and about the build site for Habitat for Humanity.
- The forklift with clamps to load railcars Clean buring diesel for use inside and outside
- The lift I need will be used on a paved service, lifting units of building products(approx. 4000-4500lbs per unit). I would like weekly and monthly rates. Thanks
- The mast and cage of the forklift has to be 85" or lees. The entire forklift must fit into a container that is 86" high.
- The primary purpose for the forklift is to lift 500-1500 lb long (96") pallets to freight truck level.
- The stand on order picker must meet the following requirements: Load: >1500 lbs Height: >416" Base Width: <73"
- The unit that we aquire will be rent to own. We currently have two units, but need three for the next three months. In three months we will trade in the unit for the one renting to own.
- This fork lift must have a cushioned seat, because I weigh 265 pound. I don't want to hear any fat jokes, either.
- Looking for Crown RC3020-40, 4000lb capacity with side shift, 2000 or sooner, less than 5000 hours.
- Looking for Yale Model VE30SO71, type e
- Looking for a good used forklift for the city shop somewhere around $10.000
- We need a small forklift to move pallets in our parts warehouse. There will be a upper deck we need to work under that will be about 9' high. We will also need to lift pallets up to this upper deck.
- We need a way to unload 18 wheelers.
- We need walk behind fork lift. The most weight we will be less than 500 lb. Height to load truck will be less than 7 feet.
- We should be able to drive it in and out of trailer
- Weight will be less than stated
- Wharehouse space is tight so I need one that will use the least amount of space that can pick up a pallet 2 deep.
- Side-shift, lights, scale for forks
- Side-shift; at least 2002 or newer model;
- Sideshifter, battery and charger, 10,000 lb capacity
- Sideshifter, lights, strobe and backup alarm. Mast cannot block view of operator. Also do you have a 48v battery charger in a single phase, we have a cat mc60 dsa to trade in with the 36v battery.
- Specifically to unload 40' ocean containers, so require "no rise" mast. Additionally, pallets are 10' long and weigh 3500lbs each, so need capacity to accomodate the extended center of gravity.
- Would like side to side hydrolics as well
