Forklift Nissan: Complete guide to Nissan forklifts

Nissan forklifts are available new or used in a variety of models and a wide range prices. Nissan forklifts are sold directly through authorized dealers and not through the official website. This article covers all of the available Nissan forklift models, used Nissan forklift prices, and new Nissan forklift prices.

Nissan forklift models: A comparison

IC Cushion: IC Cushion Nissan forklifts are available in gas, LP, or both and are designed for indoor use. All models use fuel management systems to ensure optimal engine production and fuel efficiency, while reducing exhaust emissions at the same time. Models are also equipped with an engine protection system that will alert drivers in case of a drop in oil pressure or of excessive heat for safety purposes.

IC Pneumatic: IC Pneumatic forklifts differ from cushion forklifts because they are intended for outdoor use. Each model is equipped with pneumatic tires for stability and reliable outdoor performance. IC Pneumatic forklifts also have better horsepower and torque to be used in warehouse, manufacturing, recycling, and outdoor construction environments.

Electric Rider: Electric rider forklifts are used for warehouse, manufacturing, and distribution purposes. Models are equipped with electronic power steering, hydraulic control levers, pneumatic tires, and regenerative braking capabilities.

Electric Pallet: Electric pallet forklifts are used for grocery, warehouse, and manufacturing operations. Models are equipped with two section chassis and pallet entry rollers, AC drive motor and controller systems, and chill storage protection for temperatures as low as 34°F.

Narrow Aisle: Narrow aisle forklifts offer single, narrow, and low loading options for manufacturing, distribution, and warehouse purposes. When using single reach, the forklifts can lift up to 4500 pounds; double reach forklifts can lift up to 3000 pounds.

Tow Tractors: Tow tractors are versatile alternatives for pulling carts or trailers and can also be used for order selection in a pharmaceutical environment. The tractors are equipped with an electronic brake system and an adjustable steerhead that includes coast control.

Walkie Stackers: Walkie counterbalance stackers are an affordable solution for trailer loading and unloading and loading stacking. They are designed for short distance travel and are equipped with a balanced drive system to make basic steering almost effortless.

Pallet Jacks: Pallet jacks are used in factories and rental fleets for value driven applications. Nissan pallet jacks are equipped with fingertip control levers for lowering and lifting, easy-pull loop handles, and 7 inch diameter steer wheels for improved rolling ability. All models come protected with a two-year warranty.

Used Nissan forklift prices

Many people who use this site to find forklift prices decide to purchase their forklift used. Used Nissan forklifts are available for as little as $5000, but it is recommended to purchase a used forklift directly from a dealer instead of from an individual owner or site like eBay or Craigslist. Through a dealer, you can get a warranty and receive assurance that your equipment has been thoroughly inspected and repaired before you commit to buy. Below is sample of prices people paid for used Nissan forklifts by using this site.

$4900 + Trade-In: "We purchased a used Nissan 3 wheel sit down electric forklift with power steering and driver’s overhead guard. The model was a Nissan TN01L18HV. We traded in our old Nissan Model CP1B2L25S and our net cost was $4900."
-Carlstadt, New Jersey

$3800: "We bought a 10 year old Nissan forklift used, with free delivery and pick-up of our old Nissan forklift. They offered to sell our old one on consignment."
-Sebastopol, California

$1480: "We bought a used Nissan lift truck with no gas tank and no battery."
-Grulla, Texas

$5000: "I paid $5000 for a 1992 used Nissan forklift: 6000 lb, pneumatic tires, LP gas."
-Manchester, Michigan

$8188: "I got a 2005 used Nissan, 6000 lb forklift with 1500 hours."
-Gonzales, Louisiana

Find out how much you can save on a forklift by comparing used Nissan forklift prices.

New Nissan forklift prices

Althought most of the people that use our site for forklift prices decide to purchase used forklifts, about 1 in 4 people choose to buy their forklift new. Here is a sample of prices people paid for their new Nissan forklifts.

$8300: I bought a new Nissan forklift for $8300.
-Culloden, West Virginia

$24,305: I just got the Nissan Model tx30. It's 3 wheeled, a 3000# fork lift, 36 volt battery and charger, with a side shifter.
-Detroit, Minnesota

Compare Prices on New and Used Nissan Forklifts